已完结小说排行榜,我吃西红柿

Products

desander

Date：2020-10-20
Source：http://angelover.cn/en/ylsb/89.html

Details

Cyclone cone type sand remover

A sand remover is a type of sand removal equipment used in conjunction with surface testing processes, suitable for testing well flushing, sand discharge, and sand producing formations after fracturing. It can safely remove fracturing sand from large-scale fracturing, filter and measure the sand production from the formation, and effectively reduce damage to downstream surface equipment.

Working medium: sulfur-containing and sand containing natural gas

Work pressure: 105MPA

Nominal diameter inlet diameter: 65mm (2-9/16 ")

Outlet diameter: 65mm (2-9/16 ")

Working temperature: -29 ℃~121 ℃

Gas processing capacity: 400 * 104Nm3/d

Liquid processing capacity: 2400m3/d

Separation particle size:>10um

Sand storage cylinder volume: 200L

Cyclone tube size: φ 255mm

Overall dimensions: 2960mm * 2400mm * 5750mm

Desander supporting equipment

Wellhead safety valve

Usage and characteristics: The wellhead safety valve and the wellhead control panel together form the wellhead safety control system, and the wellhead is directly opened and closed through the ground safety valve. Installed in shale gas fractures at the forefront of the pipeline process, i.e. near the wellhead. Equipped with a hydraulic drive and a remote control system, it can quickly and automatically cut off the underground pressure source in case of special situations at the well site, ensuring the safety of surface processes.

Plunger type (cylindrical) throttle valve

圖片4.jpg 圖片3.jpg

Usage and characteristics: Plunger type throttle valve is composed of alloy plunger, valve seat, and valve stem, etc. It has the characteristics of good fluidity and low vibration, and is mainly used for the sand discharge port of the sand remover. The plunger and valve seat are made of YG8 hard alloy as a whole, which has corrosion resistance and erosion resistance. They are suitable for severe erosion situations such as fracturing and backflow, and can be operated remotely with hydraulic actuators.

Oil nozzle manifold

The system is installed to control flow after the sand removal process. Designed with a base, convenient for transportation and installation.

Working media: oil, natural gas, mud, fracturing fluid, etc

Nominal diameter: 1-13/16 "to 4-1/16"

Working temperature: -60 ℃~121 ℃ (KU)

Material level: AA, BB, CC, DD, EE, FF, HH

Product level: PSL3, PSL3G

Performance level: PR1, PR2

Maximum working pressure: 20000PSI

Chip capture manifold

This system can filter and retain large particulate matter. Used to filter and recover the fracturing sand after the completion of layered fracturing. Designed with a base, convenient for transportation and installation.

Working media: oil, natural gas, mud, fracturing fluid, etc

Nominal diameter: 1-13/16 "~4-1/16"

Working temperature: -60 ℃~121 ℃ (KU)

Material level: AA~HH

Product level: PSL3, PSL3G

Performance level: PR1, PR2

Maximum working pressure: 20000PSI

Wellhead combination manifold

The wellhead combination manifold is used for pressure backflow operations in cluster wells, providing multiple channels (according to customer requirements) to achieve multi well sharing function.

Working media: oil, natural gas, mud, fracturing fluid, etc

Nominal diameter: 1-13/16 "~4-1/16"

Working temperature: -60 ℃~121 ℃ (KU)

Material level: AA~HH

Product level: PSL3, PSL3G

Performance level: PR1, PR2

Maximum working pressure: 20000PSI

racturing distribution manifold

A fracturing manifold is a system that connects the high-pressure output terminals of multiple fracturing trucks together through high-pressure elbows and high-pressure tees, and connects one or more output ports to the wellhead through high-pressure pipelines; The pressure superposition of multiple fracturing pumps allows multiple fracturing vehicles to work simultaneously. If the pressure of one vehicle is lower than the maximum pressure, there will be no output, and the displacement is the sum of the instantaneous displacement of all vehicles.

Working media: oil, natural gas, mud, fracturing fluid, etc

Nominal diameter: 3-1/16 "~7-1/16"

Working temperature: -60 ℃~121 ℃ (KU)

Material level: AA~HH

Product level: PSL3, PSL3G

Performance level: PR1, PR2

Maximum working pressure: 20000PSI